Swarm™ 4 FX User Manual Rev. 1
Page 17 of 80
4.
O
PERATION
This product is not designed for continual use. Make sure there are regular breaks during operation to maximize the life
of your laser. Always disconnect the Swarm™ 4 FX from power when not in use.
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the display.
When the product is on, the LED monitor on the rear panel will show the current operating mode
(Standalone or DMX). The product will retain the last saved settings when powered off.
Button
Function
<MENU>
Selects an operation mode or backs out of the current menu option
<UP>
Scrolls up the list of options or selects a higher value
<DOWN>
Scrolls down the list of options or selects a lower value
<ENTER>
Activates a menu option or a selected value
Menu Map
Mode
Programming Steps
Description
Auto Mode
Aut-
Aut0
S.01
–S.99
Auto Mixed Effect
Aut1
Moonflower - single color chase
Aut2
Moonflower – multi-color chase
Aut3
Laser + Strobe
Aut4
Moon Strobe
Aut5
Moonflower (single color chase) + Laser
Aut6
Moonflower (multi-color chase) + Laser
Aut7
Alternating color Laser
Aut8
Laser
Aut9
Strobe
Sound-Active Mode
Sou-
Sou0
Sound Mixed Effect
Sou1
Moonflower - single color chase
Sou2
Moonflower – multi-color chase
Sou3
Laser + Strobe
Sou4
Moon Strobe
Sou5
Moonflower (single color chase) + Laser
Sou6
Moonflower (multi-color chase) + Laser
Sou7
Alternating color Laser
Sou8
Laser
Sou9
Strobe
Slave Mode
SLA
SLAV
Slave mode
DMX
Addr
d001
–d511
02CH
d001
–d511
Sets DMX address and personality
12CH
d001
–d501
System Options
SYS
LEdS
on
Turns LEDs on
oFF
Turns LEDs off
tESt
Test mode
rESt
Reset to factory defaults
