SlimPAR™ HEX 3 IRC User Manual Rev. 2
Page 13 of 19
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
•
Connect the product to a suitable power outlet..
Never connect a product that is operating in any standalone mode (Static, Auto, or
Sound-Active) to a DMX string connected to a DMX controller. Products in
standalone mode may transmit DMX signals that could interfere with the DMX
signals from the controller.
Sound-Active
Mode
To enable the Sound-Active mode, do the following:
1. Press
<MENU>
repeatedly until
Snd
shows on the display.
2. Press
<ENTER>
and
Snd1
(6-color) or
Snd2
(63-color) shows on the display.
3. Use
<UP>
or
<DOWN>
to select the desired Sound-Active program.
4. Press
<ENTER>
.
Sound Sensitivity
To set the sound sensitivity, follow the instructions below:
1. Press
<MENU>
repeatedly until
SenS
shows on the display.
2. Use
<UP>
or
<DOWN>
to select the desired sound sensitivity (
u 0
–
u100
).
3. Press
<ENTER>
.
The product will only respond to low frequencies of music (bass and drums).
Automatic Mode
To enable the Automatic mode, do the following:
1. Press
<MENU>
repeatedly until
P--
shows on the display.
2. Press
<ENTER>
and
P 1
–
P 4
shows on the display.
3. Use
<UP>
or
<DOWN>
to select the desired auto program:
•
P 1
- 6-color snap
•
P 2
- 6-color fade
•
P 3
- 63-color snap
•
P 4
- 63-color fade
4. Press
<ENTER>
.
Program Speed
To set the auto program speed, follow the instructions below:
1. Press
<MENU>
repeatedly until
S--
shows on the display.
2. Use
<UP>
or
<DOWN>
to select the desired auto program speed
S 1
–
S100
(slow to fast).
3. Press
<ENTER>
.
Summary of Contents for SlimPAR HEX 3 IRC
Page 1: ...User Manual ...
