SlimPAR™ HEX 3 IRC User Manual Rev. 2
Page 11 of 19
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The SlimPAR™ HEX 3 IRC uses up to 12 DMX channels in its 12-channel DMX mode,
which defines the highest configurable address to
501
.
If unfamiliar with DMX, download the DMX Primer from
www.chauvetlighting.com
.
To select the DMX personality and starting address, do the following:
1. Press
<MENU>
repeatedly until
6-CH
(6-channel mode),
8-CH
(8-channel mode), or
12CH
(12-channel mode) shows on the display.
2. Press
<ENTER>
and
d 1
—
d512
shows on the display.
3. Use
<UP>
or
<DOWN>
to select the starting address.
4. Press
<ENTER>
.
Summary of Contents for SlimPAR HEX 3 IRC
Page 1: ...User Manual ...
