Page 14 of 19
Shocker™ Panel 180 USB User Manual Rev. 1
IRC-6 Infrared
Remote
Control
The Shocker™ Panel 180 USB is compatible with the IRC-6 infrared remote control from
Chauvet. To activate IR mode, follow the instructions below:
1. Press
<MENU>
repeatedly until
SEr
shows on the display.
2. Press
<ENTER>
to accept.
3. Press
<UP>
or
<DOWN>
to select
ON
or
OFF
.
4. Press
<ENTER>
.
IRC-6 Operation
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
1. Press
<AUTO>
on the IRC.
2. Press
<+>
or
<–>
to choose between the different auto programs.
To adjust the speed of the automatic program:
1. Press
<SPEED>
on the IRC.
2. Press
<+>
or
<–>
to either increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
1. Press
<SOUND>
on the IRC.
2. Press
<+>
or
<–>
to
select
Snd1
or
Snd2
.
To adjust sound sensitivity in Sound-Active mode:
1. Press
<SENSITIVITY>
on the IRC.
2. Press
<+>
or
<–>
to either increase or decrease sound sensitivity.
Manual Strobe Control
To adjust the dimmer level:
1. Press
<MANUAL>
on the IRC.
2. Press
<+>
or
<–>
to increase or decrease the dimmer level.
To adjust the strobe rate:
1. Press
<STROBE>
on the IRC.
2. Press
<+>
or
<–>
to increase or decrease the strobe rate.
Black Out
To black out the lights:
Press
<BLACK OUT>
on the IRC.
This will turn off all the lights until the button is pressed again.
NOTE
: The IRC will not respond to any inputs when Black Out is activated. If the remote
does not respond when a button is pressed, try pressing
<BLACK OUT>
. You may
have inadvertently activated Black Out.
Summary of Contents for SHOKER PANEL 180 USB
Page 1: ...User Manual ...
