Shocker™ Panel 180 USB User Manual Rev. 1
Page 13 of 19
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Automatic
Programs
To run the Shocker™ Panel 180 USB in automatic mode, follow the instructions below:
1. Press
<MENU>
repeatedly until
P--
shows on the display.
2. Press
<ENTER>
.
3. Use
<UP>
and
<DOWN>
to select an auto program
P 1–P 8
.
4. Press
<ENTER>
.
Sound-Active
Mode
To run the Shocker™ Panel 180 USB in sound-active mode, do the following:
1. Press
<MENU>
repeatedly until
SNd
shows on the display.
2. Press
<ENTER>
.
3. Use
<UP>
and
<DOWN>
to select a sound-active program
Snd1
or
Snd2
.
4. Press
<ENTER>
.
The product will only respond to low frequencies of music (bass and drums).
Custom Mode
To custom mix a static color, follow the instructions below:
1. Press
<MENU>
repeatedly until
U--
shows on the display.
2. Press
<ENTER>
and
dxxx
will show on the display:
3. Use
<UP>
and
<DOWN>
to increase or decrease the dimmer value.
4. Press
<ENTER>
and
Sxxx
will show on the display.
5. Use
<UP>
and
<DOWN>
to increase or decrease the strobe speed.
Auto-Program
Speed
To change the auto-program speed on the Shocker™ Panel 180 USB, do the following:
1. Press
<MENU>
repeatedly until
S--
shows on the display.
2. Use
<UP>
and
<DOWN>
to increase or decrease the program speed (
S 1–S100)
.
3. Press
<ENTER>
. The product will return to the last selected mode.
Sound Sensitivity
To change the sound sensitivity on the Shocker™ Panel 180 USB, follow the instructions
below:
1. Press
<MENU>
repeatedly until
SenS
shows on the display.
2. Use
<UP>
and
<DOWN>
to increase or decrease the sound sensitivity (
u 0–u100)
.
3. Press
<ENTER>
. The product will return to the last selected mode.
Temperature
To view the current temperature of the Shocker™ Panel 180, follow the instructions below:
1. Press
<MENU>
repeatedly until
teMP
shows on the display.
2. Press
<ENTER>
.
Summary of Contents for SHOKER PANEL 180 USB
Page 1: ...User Manual ...
