Scorpion™ BLU User Manual (Rev. 6)
Page 11 of 21
Mounting
Orientation
The Scorpion™ BLU units may be mounted in any position, provided there is
adequate room for ventilation.
Rigging
Be sure that the structure onto which you are mounting this product can support its
weight. Please see the “Technical Specifications” section of this manual for weight
information.
Mount the product securely. You can do this with a screw, a nut, and a bolt. You
could also use a mounting clamp if rigging this product onto a truss. The bracket has
a hole 13 mm in diameter, which is appropriate for this purpose.
When mounting this product overhead, always use a safety cable.
Always consider ease of access to the unit for maintenance and programming
purposes before deciding on a location for this product
When power linking multiple products, always consider the length of the power linking
cable and mount the products close enough from each other to accommodate for this.
The bracket knobs allow for directional adjustment when aiming the product to the
desired angle. Do not use tools to loosen or tighten the bracket knobs. Doing
otherwise could damage the knobs.
Mounting Diagram
Hanging Bracket
Bracket Adjustment
Knob (1 of 2)
Rubber Feet
13 mm hole
Safety Loop
