RotoSphere™ LED User Manual (Rev. 03)
Page 9 of 18
Mounting
Before mounting this product, read and follow the safety recommendations indicated in
the
Safety Notes
section (page 2 of this manual).
Orientation
The RotoSphere™ LED may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
Rigging
Before deciding on a location for this product, always make sure that it will be easy to
access the unit for maintenance and programming purposes.
Make sure that the structure or surface onto which you are mounting this product can
support its weight. Please see the
Technical Specifications
section of this manual for
weight information.
When mounting this product overhead, always use a safety cable. Mount the product
securely to a rigging point, whether an elevated platform or a truss.
When rigging this product onto a truss, you should use a mounting clamp of appropriate
weight capacity. The bracket has a 13 mm hole, which is appropriate for this purpose.
When power linking multiple products, you must always consider the length of the power
linking cable and mount the products close enough for the cable to reach.
The rubber feet also serve as floor supports/allow for surface mounting. When mounting
this product on the floor, make sure that the product and its cables are away from people
and vehicles.
Mounting
Diagram
Rubber
Feet
(x4)
Safety
Hook
Mounting
Bracket
