EN
Q-Wash™ 419Z-LED QRG
3
What Is
Included
•
Q-Wash™ 419Z-LED
•
Power input cord
•
2 Omega brackets
•
Safety cable
•
Warranty card
•
Quick Reference Guide
AC Power
This product has an auto-ranging power supply that can work with
an input voltage range of 100 to 240 V, 50/60 Hz.
Power Linking
You can link up to 5 Q-Wash™ 419Z-LED products at 120 V or
9 at 230 V. Never exceed this number. Power linking cords can be
purchased separately.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Replacing the
Fuse
Disconnect this product from power.
1.
Using a Phillips #2 head screwdriver, unscrew the fuse holder
cap from the housing.
2.
Using the same type and rating, remove the blown fuse and
replace it with a good fuse.
3.
Screw the fuse holder cap back into place and reconnect power.
DMX Linking
The Q-Wash™ 419Z-LED will work with a DMX controller using a
regular DMX serial connection. For more information on how to
configure for DMX operation, see
DMX Primer
from
www.chauvetpro.com
.
DMX
Connection
The Q-Wash™ 419Z-LED uses a regular DMX data connection for
its DMX personalities:
PERSON1
,
PERSON2
,
PERSON3
,
PERSON4
, and
PERSON5
. See the user manual to connect and
configure for DMX operation.
Master/Slave
Connection
The Q-Wash™ 419Z-LED uses the DMX data connection for its
Master/Slave mode. See the user manual to connect and configure
for master/slave operation.