Operation
-12-
Q-Beam 260-LED User Manual Rev. 01d
Continued from previous page
Software Version
1) Go to
MENU > INTRO > INFO
.
a) The display will show the installed software version.
Range Limitation
1) Go to
MENU > RANGE > P/START
.
a) Select the starting point for the limited pan (
000~255
).
2) Go to
MENU > RANGE > P/FINISH
.
b) Select the finishing point for the limited pan (
000~255
).
3) Go to
MENU > RANGE > T/START
.
c) Select the starting point for the limited tilt (
000~255
).
4) Go to
MENU > RANGE > T/FINISH
.
d) Select the finishing point for the limited tilt (
000~255
).
5) Go to
MENU > RANGE > USE
.
e) Select
YES
to activate the new settings or
NO
to stop using them.
Move-in Black
1) Go to
MENU > SPECIAL > BLACK
.
a) Select
YES
to enable the 3 seconds delay or
NO
to make the blackout
immediate.
Reset Control
1) Go to
MENU > SPECIAL > RESET
.
a) Select
DMX
to enable the DMX controller to reset the fixture (
Control
function) or
NO
to reset the fixture only from the control panel.
System Default
1) Go to
MENU > DEFAULT > DEFAULT
.
a) Select
YES
to default the fixture to its original factory settings.
End of Programming
