Q-Beam 260-LED QRG
Page 4 of 8
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Fuse
Replacement
1) Disconnect the unit from the power outlet.
2) With a flat head screwdriver, wedge the fuse holder out of its housing
and remove the blown fuse from its holder.
3) Replace the blown fuse with a fuse of the exact same type and rating.
4) Insert the fuse holder back in its place, and reconnect power.
Mounting
Before mounting this product, read the safety notes at the beginning of this
guide and on page 2 of the product’s user manual. Then, follow the
mounting procedure indicated in the Setup chapter of the user manual.
Product
Mounting
Diagram
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value into the selected function
<UP>
Navigates upwards through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases
the numeric value when in a function
Programming
For details on how to program this product, please refer to the product’s
user manual.
Password
After being prompted to enter the password, press:
<UP>
,
<DOWN>
,
<UP>
,
<DOWN>
, and
<ENTER>
Floor
Mounting
Overhead
Mounting
C Clamps (not included)
Safety cable (included)
Omega brackets (included)
Summary of Contents for Q-3eam 260-LED
Page 1: ...Quick Reference Guide ...
