Chauvet pvp x3, User Manual, Page: 28 / 150

Connecting (Cabling) Each PVP
18 PVP X3 User Manual, Rev. 6
6. Connecting (Cabling) Each PVP X3
Testing Signal and
Power Connections
Each PVP X3 has 2 power sockets and 2 signal ports.
•
The Power and Signal connections are located on the underside of the service
module of each panel.
•
The Signal ports may be used interchangeably.
•
Each PVP X3 has LED indicator lights.
•
Each panel indicates a successful power connection when the Power indicator light
remains red.
•
Each panel indicates video signal reception when the Signal LED indicator light blinks
green. This light should be blinking to indicate good reception.
Using the PVP X3
Test button
Each PVP X3 also has a Test button, used to ensure all LEDs are functional. Use the
Test button on each panel to perform a self-test. If self-testing, you must perform the test
individually for each PVP X3. You do not need to connect to a signal or use software.
When using the Test button, make sure the PVP X3 is not connected to the VIP
Driver.
To use the Test button, you must connect the power, but do not connect the signal
cables. Press the Test button to toggle through various LED light display configurations.
Rear Panel View
Underside of Service Access View
Power Out
Power In
Power LED indicator
Test Button
Signal LED indicator
Signal Connections