Chauvet pvp x3, User Manual, Page: 17 / 150

Setup
PVP X3 User Manual, Rev. 6 7
3. Setup
AC Power
Each PVP X3 has an auto-ranging power supply that works with an input voltage range
of 100–240 VAC, 50/60 Hz. To determine the power requirements for each
PVP X3, refer to the label affixed to the product. You can also refer to the Technical
Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation.
For more information, download Sizing Circuit Breakers from the Chauvet website:
www.chauvetprofessional.com .
•
Always connect this product to a protected circuit with an appropriate
electrical ground to avoid the risk of electrocution or fire.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by
unplugging it.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
Each PVP X3 comes with a power linking cord to connect power between panels; and a
power input cord.
This cable has a powerCON connector to connect to the PVP X3 and an Edison plug for
power input. Use the table below as a reference to wire a new plug.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
Power Linking
All panels in the PVP Series support power linking. Refer to the following table for
specifications on each panel.
PVP X3
@ 120 V, 60 Hz
20
@ 208 V, 60 Hz 35
@ 230 V, 50 Hz 37
Please refer to all applicable local codes and regulations for the proper installation
of this product.