EN
PiX™ PAR 24 QRG
Page 3 of 64
Product
Description
The PiX™ PAR 24 is a compact, pixel mapping par can with individual
LED control for animation and video effects. It includes multiple DMX
personalities to fit any programming style. The PiX™ PAR 24 also works
with ShowXpress™ Pixels for ease of use. It includes built-in dimming
curves allowing for flicker-free video operation.
Product Overview
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Power Linking
You can link up to 8 PiX™ PAR 24 units at 120 VAC and 15 units at 230
VAC. You should never exceed this number.
Fuse Replacement
To replace the fuse in the PiX™ PAR 24, use the following steps:
1.
Disconnect this product from the power outlet.
2.
Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3.
Pry the safety cap out of the housing pulling out the installed fuse.
4.
Remove the blown fuse from the safety cap and replace with a fuse of
the exact same type and rating.
5.
Insert the fuse holder back in place and reconnect power.
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<UP>
Navigates upwards through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases the
numeric value when in a function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value into the selected function
After you use the
<UP>
and
<DOWN>
buttons, press
<ENTER>
to set
the selected value. Otherwise, the menu function or value defaults back to
its previous setting.
Power Out
Fuse Holder
LED Display
5-pin DMX Connectors
Power In
3-pin DMX Connectors
Summary of Contents for PiX PAR 24
Page 1: ...Quick Reference Guide ...
