Operation
-12-
Ovation™ F-165WW User Manual Rev. 2
Dimmer - Menu
Control
To adjust the light output of the Ovation™ F-165WW, select the dimmer setting as
follows.
1. Go to the
STAT
main level.
2. Go to the
DIM
programming level.
3. Select the desired dimmer setting
D.000
–
D.100
(0–100% light output).
Dimmer - Manual
Control
Manually adjust the light output by using the dimmer adjustment knob, as follows.
1. Press the dimmer adjustment knob above the display twice.
2. Select the desired dimmer setting
D.000
–
D.100
(0–100% light output) by turning the
knob clockwise (value increases) or counter-clockwise (value decreases).
•
When using the dimmer adjustment knob, the lowest dimmer value stops at D.000
and the highest dimmer value stops at D.100.
•
During manual dimmer control, you can also use <UP> or <DOWN>, which will
cycle through all the dimmer values.
•
After 30 seconds of dimmer adjustment knob inactivity, M. appears on the display.
Dimmer Speeds
Select the dimmer speed of the Ovation™ F-165WW by selecting the
DIMX
programming level.
1. Go to the
SET
main level.
2. Select the
DIMX
programming level.
3. Select a dimmer speed
DIM1
–
DIM4
(fast to slow) or
OFF
(linear output).
When selecting DIM1–DIM4, the output will correspond to the dimmer curve option
selected under the dimmer curves programming level (CURV).
Dimmer Curves
Select the dimmer curve of the Ovation™ F-165WW by selecting the
CURV
programming level. These options simulate the dimmer curve of an incandescent lighting
product.
1. Go to the
SET
main level.
2. Select the
CURV
programming level.
3. Select a dimmer curve
CV1
–
CV3
(small to large) or
OFF
(linear output).
Control Panel Lock
This setting enables you to activate or deactivate the control panel lock, which keeps
non-authorized personnel from changing the product’s settings.
1. Go to the
SET
main level.
2. Go to the
KEY
programming level.
3. Select either
ON
(activate) or
OFF
(deactivate).
When the control panel lock is activated, after 30 seconds of control panel inactivity
or after turning on the product, the product will prompt you to enter the passcode.
Passcode
After being prompted to enter the passcode:
•
Press
<UP>
,
<DOWN>
,
<UP>
,
<DOWN>
,
<ENTER>
.
Note:
Asterisks (
*
) appear on the display when entering the passcode.
Passcode can not be changed.
Menu Access Lock
This setting enables you to activate or deactivate the menu access lock. Activating the
menu access lock prevents non-authorized personnel from making any changes to the
programming levels under the
SET
main level.
1. Go to the
SET
main level.
2. Go to the
SLCK
programming level.
3. Select either
ON
(activate) or
OFF
(deactivate).
When the menu access lock is activated, in order to access the SET programming
levels, the product will prompt you to enter the passcode. Enter the passcode as
described in
Passcode
.
Summary of Contents for Ovation F-165WW
Page 1: ...User Manual ...
