Setup
Ovation™ F-165WW User Manual Rev. 2
-7-
Power Linking
The Ovation™ F-165WW supports power linking. You can power link up to 5 units on
120 V; up to 9 units on 208 V; or up to 10 units on 230 V.
This product comes with a Neutrik® powerCON® input power cord. This product does not
come with a power linking cable; however, a power linking cable is available as an option.
DMX Linking
You can link the Ovation™ F-165WW to a DMX controller using a standard DMX serial
connection. If using other DMX-compatible products with the
Ovation™ F-165WW, you can control each individually with a single DMX controller.
DMX Modes
The Ovation™ F-165WW uses the standard DMX data connection for the 1-, 2- and
5-channel DMX modes.
•
Refer to the
Introduction
chapter for a brief description of these modes.
•
Refer to the
Operation
chapter to learn how to configure the Ovation™ F-165WW to
work in these modes.
•
The
DMX Values
section provides you with detailed information regarding the DMX
modes.
Master/Slave
Connectivity
The Master/Slave mode allows a single Ovation™ F-165WW (the “master”) to control the
actions of one or more Ovation™ F-165WW units (the “slaves”) without the need of a
DMX controller to control the slaves. Once set and connected, the slaves will operate in
unison with the master. For instructions on connecting and configuring this product, see
Master/Slave Mode
.
DO NOT connect a DMX controller to products operating in Slave mode. The DMX
controller signals may interfere with the signals from the master product.
The
Operation
section of this manual provides detailed instructions on how to
configure the master and slaves products.
If you are not familiar with or need more information about DMX standards,
master/slave connectivity, or the DMX cables needed to link this product to a DMX
controller, download the DMX Primer
from the CHAUVET® website:
www.chauvetprofessional.com
.
Summary of Contents for Ovation F-165WW
Page 1: ...User Manual ...
