EN
2
Ovation E-260CW QRG Rev. 6
QUICK REFERENCE GUIDE
AC Plug
DMX Linking
The Ovation E-260CW will work with a DMX controller using a 3- or 5-pin DMX serial connection. A DMX Primer is
DMX Connection
The Ovation E-260CW uses a 3- or 5-pin DMX data connection for its DMX personalities:
1 Ch
,
2 Ch
,
3 Ch
, and
6 Ch
.
See the User Manual for information about connecting and configuring the product for DMX operation.
Master/Slave Connection
The Ovation E-260CW uses the DMX data connection for its master/slave mode. See the User Manual for information
about how to connect and configure the product for master/slave operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not all DMX controllers
have this capability. The Ovation E-260CW supports RDM protocol that allows feedback to make changes to menu map
options. Download the User Manual from
for more details.
Mounting
Before mounting this product, read the
. Use at least one mounting point per product. Make sure the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/
Product Mounting Diagram
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
!
Mounting Clamp
Overhead Mounting
Safety Cable
* Lens tubes sold separately
Alternate Yoke
Attachment
Secure the safety cable
using the passageway on
the back of the product.
