Joining Each MVP™ (Creating a Modular Design)
10-
MVP™ Ta8 Curve User Manual, Rev. 1
Horizontal Joining
Procedure
(+/- 18°)
Use the following instructions to join your panels horizontally.
1. Loosen locking/adjustment knobs and pull arms out as shown in step 1 and 2.
2. Pull together adjoining panel, set the same angle on both arms and lightly tighten
adjustment knobs as shown in step 2. (This is for connection only and can be re-
adjusted later.)
3. Attach outer end of arms to adjoining panel and tighten all the locking knobs as
shown in step 3.
4. Set the adjustment knobs to the desired angle and tighten in place.
Step 1
Step 2
Step 3
