Page 10 of 13
Minisphere™ 3 User Manual (Rev. 4)
1. Set the master product to operate in either Automatic or Sound mode.
2. Make the master product the first product in the DMX daisy chain.
•
Configure all the slave units before connecting the master unit to the DMX
daisy chain.
•
Never connect a DMX controller to a DMX string configured for Master/Slave
operation because the controller may interfere with the signals from the
master unit.
•
Do not connect more than 31 slave units to the master unit.
DMX Channel Assignments and Values
4-CH
Channel
Function
Value
Setting
1
Effects
000
009 Blackout
010
019 Red rotation
020
029 Green rotation
028
039 Blue rotation
040
049 Red + Green rotation
050
059 Red + Blue rotation
060
069 Green + Blue rotation
070
079 Red + Green + Blue rotation
080
229 Red + Green + Blue chase
230
255 Automatic Sound
2
Strobe
000
255 0~100% (slow to fast)
3
Effect Speed
000
255 0~100% (slow to fast)
4
Rotation Speed
000
255 0~100% (slow to fast)
5.
T
ECHNICAL
I
NFORMATION
Product
Maintenance
Dust build-up reduces light output performance and can cause overheating. This can
lead to reduction of the light source’s life. To maintain optimum performance and
minimize wear, you should clean your lighting products at least twice a month. However,
be aware that usage and environmental conditions could be contributing factors to
increase the cleaning frequency.
To clean the product, use the following instructions:
•
Unplug the product from power.
•
Wait until the product is cold.
•
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents and reachable internal components.
•
Clean all glass/transparent surfaces with a mild soap solution, ammonia-free glass
cleaner, or isopropyl alcohol.
•
Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
•
Softly drag any dirt or grime to the outside of the glass/transparent surface.
•
Gently polish the glass/transparent surfaces until they are free of haze and lint.
•
When cleaning units with one or more movable mirrors, you should keep the contact
with the mirror’s surface to a minimum to avoid scratching or damaging it.
Always dry the glass/transparent surfaces carefully after cleaning them.
