Chauvet Mini Moon LED 360, User Manual

Page: 13 / 18

5. Appendix
13 8/31/2010 4:41 PM
5. A
PPENDIX
General Troubleshooting
S
YMPTOM
P
OSSIBLE
C
AUSE
(
S
) P
OSSIBLE
A
CTION
(
S
)
Breaker/Fuse
keeps blowing

Excessive circuit load

Check total load placed on the
electrical circuit.

Short circuit along the power
wires

Check for a short in the electrical
wiring (internal and/or external).
Device does not
power up

No power

Check for power on Mains.

Loose power cord

Check power cord
Fixture is not
responding to DMX

Wrong DMX addressing

Check Control Panel and unit
addressing

Damaged DMX cables

Check DMX cables

Wrong polarity settings on the
controller

Check polarity switch settings on
the controller

Loose DMX cables

Check cable connections

Faulty DMX interface

Replace DMX input

Faulty Main PCB

Replace Main PCB
Loss of signal

Non DMX cables

Use only DMX compatible cables

Bouncing signals

Install terminator as suggested.

Long cable / Low level signal

Install amplifier right after fixture
with strong signal.

Too many fixtures

Install an optically coupled DMX
splitter after unit #32.

Interference from AC wires

Keep DMX cables separated from
power cables or black lights.
If you still have a problem after trying the above solutions, please contact CHAUVET®
Technical Support.