TPL VISION UK
Brenchley House – School Road – Charing – Kent TN27 0JW – UK
Tel. +44 (0)1738 310 392 – www.tpl-vision.com
User gUide
User gUide
P4/4
Featur
es and pr
esentations liable to changes without notice.
Ref.UG-040701-D1, 2020/01 edition.
Preamble
This notice includes all the advice and warnings that enables a correct set up and a safe use of the product.
TPL Vision can not be responsible for the bad use of the notice. If so, TPL Vision cancels the guarantee’s effects.
User secUrity
Do respect the power supply voltages
and the connection terminals.
Do not modify or dismantle all
or part of the product.
Do not connect or clean when power is on.
Do not watch the lighting source
directly, and follow the advice below :
• If the workstation enables it, interpose a filter that
will stop the lighting radiation under fixed or adjus-
table frame between the source and the operator.
• When these measures cannot be implemented,
supply the operators with glasses (class 4)
available for sale at TPL Vision, or with a dedi-
cated protective mask, that will stop the lighting
radiation.
• Forbid or limit the direct access to the lighting
source (exposure into the radiation axis).
• Establish a security perimeter so as to prevent
the operators from approaching the lighting
source beyond the recommendations of the manu-
facturer, as for eye irritation is concerned.
• In any case, ensure that the chosen means pro-
perly reduce the exposition quantities (features of
screens or glasses to be chosen, according to the
wavelengths that the operators are exposed to).
eqUiPment maintenance
CLeaNINg (when the product is switched off)
Please use a soft and dry cloth. Do not use any abrasive material. Do not use any cleaning solvent or aggressive
chemical product. TPL Vision recommends to use isopropyl alcohol.
risk class
The EN-62471 norm about lighting fluxes enables the classification of led lightings in 4 distinct groups, according to their
hazardousness degree. Please find below an indicative table, recapitulating the classes of risk for our standard products.
Colour
Class
Risk
White WHI, Green 525 nm, Red 630 nm
0
none
UV 405 nm, Blue 470 nm, IR 850 nm
1
low
UV 365 nm
2
moderate
UV 385 nm
3
high
In all cases, TPL Vision recommends
the use of the protection glasses
that are listed in its catalog.
For more information about photo-
biological risks, do not hesitate to
contact us.
UnPacking
Products are packed in our factory, using suitable materials for a safe transport through the usual means of transpor-
tation, in France and internationally. However, a damaged package must be reported to the carrier on delivery. Hand-
written reservations must be indicated on the delivery order. Moreover, please send a letter or an email to TPL Vision as
soon as possible (up to 24 hours after the delivery). If the transportation damage has not been stipulated on the delivery
order and reported to TPL Vision in time, the package will not be taken back nor exchanged. To open the package, do not
use any cutting blade to avoid damaging the product(s). Please use the delivered accessories, if needed (do not use any
other products or equivalents to replace the delivered accessories).
diffUser & Polariser
(oPtional kit)
• Insert either the opaque or the satin diffuser
into the bracket.
• Polarisation: insert clear window into bracket,
remove film on polariser and apply polariser
to the clear window within the bracket. Be
careful, any fingerprints on the polariser can
degrade the polarisation.
• Insert the bracket onto the TSPOT 1.
Then, use the 2 fastening screws to secure
the assembly.
DIffUSeR
POLaRISeR
(if required)
BRaCKeT
Fastening
SCRew
Fastening
SCRew
tsPot 1
