Mega Moon
™ User Manual
9
9/16/2010 4:11 PM
4.
O
PERATING
I
NSTRUCTIONS
Operation Modes
The fixture may be operated on stand-alone (sound activated), Master/Slave Mode or DMX Mode.
Stand-Alone Mode (Sound-Active)
This mode allows a single fixture to run to the beat of the music, or the fixture will change
automatically in Auto Mode.
1)
Set the DIP switches position to Sound Active or Auto Mode.
Mode
DIP switches
Master sound-active
1~10 = Off
2)
The fixture will react to the low frequencies of music via the internal microphone in Sound Active
mode.
3)
Use the audio sensitivity knob on the back of the fixture to make the fixture more or less
sensitive in Sound-Active mode. Turning the knob counterclockwise decreases the sensitivity;
turning the knob clockwise increases the sensitivity.
Note:
To use the fixture in automatic (without the sound trigger), you must use a DMX controller.
Master/Slave Mode (Sound)
This mode will allow you to link up to 32 fixtures together without a controller.
1)
Use standard DMX cables to daisy chain your fixtures together via the DMX connector on the
rear of the fixtures. (For longer cable runs, we suggest a terminator at the output of the last
fixture).
2)
Choose a fixture to function as the Master. Turn DIP switches to the Master position on the
fixture. The Master fixture must be the first fixture in line.
3)
Please see the DIP switches settings for
Stand-Alone Mode (described above)
to set the fixture
to
the
Master
setting of your choice.
4)
Turn the DIP switches to the Slave position on the Slave fixture, and they will react the same as
the Master.
Mode
DIP switches
Slave
1, 10 = On
