3. Setup
7
1/11/2011 6:12 PM
Mounting
Orientation
The LX-15
may be mounted in any position, provided there is adequate room for ventilation.
Rigging
Be sure that the structure can support the weight of the fixture. Please see the “Technical
Specifications” section of this manual for a detailed weight listing. Mount the fixture securely.
This may be done with a screw, nut and bolt, or a hanging clamp. The hole in each bracket is 13
mm in size. When rigging consider routine maintenance and access. Please see the following
notes on installation.
•
When aiming the fixtures, you may use the bracket adjustment knob. Loosen the
knob, adjust to the desired angle, and then tighten the knob by turning clockwise. Do
not use tools for this step, as it may cause damage.
•
Safety cables must always be used.
Mounting
bracket
Do not use a tool on
the bracket
adjustment knob
Summary of Contents for LX-15
Page 1: ...LX 15 User Manual ...
