background image

 
 
 
 

Page 4 of 14 

LFS-5 User Manual (Rev. 08) 

Product at a 

Glance 

Use on Dimmer 

Auto Programs 

Outdoor Use 

 

Auto-ranging Power Supply 

Sound Activated 

 

Replaceable Fuse 

DMX 

User Serviceable 

Master/Slave 

Duty Cycle 

 

 

Safety Notes 

Please read the following Safety Notes carefully before working with this product. They 
include important safety information about its installation, usage, and maintenance. 

 

 

 

  Always connect this product to a grounded circuit to avoid the risk of electrocution. 

  Always disconnect this product from the power source before cleaning it or replacing 

the fuse. 

  Avoid direct eye exposure to the light source while the product is on. 

  Make sure the power cord is not crimped or damaged. 

  Never disconnect this product from power cord by pulling or tugging on the cord. 

  If mounting this product overhead, always secure it to a fastening device using a 

safety cable. 

  Make sure there are no flammable materials close to the unit while operating. 

  Do not touch this product’s housing when operating because it may be very hot.  

 

 

 

  Always make sure that the voltage of the outlet to which you are connecting this 

product is within the range stated on the decal or rear panel of the product. 

  This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not 

expose this product to rain or moisture. 

  Always install this product in a location with adequate ventilation, at least 20 in (50 

cm) from adjacent surfaces.  

  Be sure that no ventilation slots on the unit’s housing are blocked. 

  Never connect this product to a dimmer. 

  Make sure to replace the fuse with another of the same type and rating. 

  Never carry this product from the power cord or any moving part. Always use the 

hanging/mounting bracket or the handles. 

  The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this 

product at higher temperatures.  

  In the event of a serious operating problem, stop using the unit immediately.  

  Never try to repair this product. Repairs carried out by unskilled people can lead to 

damage or malfunction. Please contact the nearest authorized technical assistance 
center. 

 

 

 

  Keep this User Manual for future consultation. If you sell this product to another user, 

be sure that they also receive this document. 

 

 

Summary of Contents for LFS-5















Reviews: