LED Par 64-36VW B&C User Manual
4
Rev. 4
Safety Instructions
•
Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that
they also receive this instruction booklet.
•
Always make sure that you are connecting to the proper voltage, and that the line voltage you are
connecting to is not higher than that stated on the decal or rear panel of the fixture.
•
This product is intended for indoor use only! To prevent risk of fire or shock, do not expose fixture to
rain or moisture.
•
Make sure there are no flammable materials close to the unit while operating.
•
The unit must be installed in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces. Be sure that no ventilation slots are blocked.
•
Always disconnect from power source before servicing or replacing fuse and be sure to replace with
same fuse source.
•
Secure fixture to fastening device using a safety chain.
•
Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate fixture at temperatures higher
than this.
•
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the
unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please
contact the nearest authorized technical assistance center.
•
Never connect the device to a dimmer pack.
•
Make sure the power cord is never crimped or damaged.
•
Never disconnect the power cord by pulling or tugging on the cord.
•
Never carry the fixture directly from the cord. Always use the hanging/mounting bracket.
•
Avoid direct eye exposure to the light source while it is on.
2.
I
NTRODUCTION
Features
•
2 or 4-channel DMX-512 variable white LED PAR can
•
Operating modes:
2-channel: warm white, cool white
4-channel: warm white, cool white, strobe rate, dimmer
Additional Features
•
Built-in automated programs via master/slave with variable speed
•
Built-in sound activated programs via master/slave
•
Static color mixing without DMX controller
•
Available in black or chrome
•
High-power, 1 W, 350 mA LEDs
•
Additional power output: max 8 units
•
Double-bracket yoke doubles as floor stand
•
Includes gel frame
Please read these instructions carefully. It includes important
information about the installation, usage and maintenance of this
product.
