Page 18 of 114
JAM Pack™ Gold User Manual Rev. 2
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the
Safety Notes
. The JAM Pack™ Gold products can be surface mounted, but if you choose to
mount overhead using the mounting hole, do this with a screw, nut and bolt, or a hanging clamp.
When rigging, consider routine maintenance. Please see the following notes on installation.
Orientation
The JAM Pack™ Gold products must be mounted in a position that includes planning for safe
laser usage. In addition, make sure adequate ventilation is provided around the product.
Installation
(Rigging)
•
Before deciding on a location for the product, always make sure there is easy access to the
product for maintenance and programming.
•
Make sure that the structure or surface onto which you are mounting the product can support
the product’s weight (see
Technical Specifications
).
•
When mounting the product overhead, always use a safety cable. Mount the product
securely to a rigging point, such as an elevated platform or a truss.
•
When aiming the products, you may use the bracket adjustment knob(s). Loosen the
knob(s), adjust to the desired angle, and then tighten the knob(s) by turning clockwise. Do
not use tools for this step, as it may cause damage.
Mounting Diagram
L-Brackets
Mounting Clamp
Bracket
Adjustment
Knobs
Mounting
Clamp
Safety
Cable
Rubber Feet
(x4) for Floor
Mounting
Mounting
Bracket
Surface
Mounting
