Chauvet Hurricane Haze 3D, User Manual

Page: 10 / 16

Page 10 of 16 Hurricane™ Haze 3D User Manual Rev. 1
4. Operation
Control
Panel
Operation
To access the control board functions, use the three buttons located underneath the
display.
Button Function
<MENU>
Press to scroll through the
operating modes
<
▲
> UP
Press to find a higher value
<
▼
> DOWN
Press to find a lower value
Important note regarding the priority level for the three types of methods used
to control the operation of your Hurricane™ Haze 3D.
The priority control levels are:
1. DMX - A DMX contrtoller takes priority control over both the product’s
digital control panel and the HC-T.
2. Digital control panel - The control panel will only take priority control over
the HC-T.
3. HC-T remote controller - The HC-T has the lowest priority control level.
Examples:
•
If using the digital control panel and afterwards you connect a DMX
controller to the product, then the DMX controller will take priority control.
•
If using the remote controller and the digital control panel is used next,
then the digital control panel will take priority control.
Fluid Tank
Indicator
LEDs
Indicator LEDs show the status of the fill tank, as follows:
•
Red - the fluid tank is currently heating
•
Flashing Red - the fluid tank is currently heating and requires refilling
•
Blue - the fluid tank is ready
•
Flashing Blue - the heater is warmed but the fluid tank requires refilling
Note: The Hurricane™ Haze 3D may output haze for a short duration to allow for a
self-checking cycle.
Menu Map
Mode Programming Steps Description
DMX Mode d*** 001–512
Selects the DMX starting address
Manual
Mode
Haze
Volume
h001–h005
Selects the volume of haze output,
low to high
Blower
Speed
f001–f005
Selects the blower fan speed,
low to high