Hurricane™ Haze 2 User Manual
13
10/1/2010 5:13 PM
General Troubleshooting
Symptom Solution(s)
Auto shut off
Check thermal switch reset
Breaker/Fuse keeps
blowing
Check total load placed on device
Device has no power
Check for power on Mains.
Check device’s fuse. (internal and/or external)
Fixture is not responding
Check DMX Dip switch settings for correct addressing
Check DMX cables
Check polarity switch settings
Fixture is on but there is
no movement to the audio
Make sure you have the correct audio mode on the control switches. If
audio provided via ¼” jack, make sure a live audio signal exists
Adjust sound sensitivity knob
Loss of signal
Use only DMX cables
Install terminator
Note: Keep DMX cables separated from power cables or black lights.
Remote does not work
Make sure connector is firmly connected to device
Stand alone mode
All CHAUVET® lighting fixtures featuring stand-alone functions do not
require additional settings, simply power the fixture and it will
automatically enter into this mode
If you still have a problem after trying the above solutions, please contact CHAUVET®
Technical Support at the location below.
Technical Support
Address: Service Dept.
5200 NW 108
th
Ave
Sunrise, FL 33351
Support (Email): [email protected]
Telephone: (954) 929-1115 - (Press 4)
Fax: (954) 929-5560 - (Attention: Service)
Website: http://www.chauvetlighting.com
Summary of Contents for Hurricane Haze 2
Page 1: ...User Manual ...
