EN
4
Hurricane 1302 QRG Rev. 1
QUICK REFERENCE GUIDE
Mounting
Before mounting this product, read the
.
Mounting Diagram
This product may NOT be tilted. This product should be level when mounted or in use.
While operating the Hurricane 1302, make sure there is adequate fog fluid in the machine to
prevent pump and heater damage. When the fog fluid level becomes low, simply add more fog
fluid to continue using the Hurricane 1302.
•
As long as there is fluid in the line, the Hurricane 1302 will continue to output a small amount fog.
•
After use, allow the Hurricane 1302 to run for several minutes until the line is clear of fluid.
To prevent spills or leaks before, during, or after transport, Chauvet recommends the following
steps for your Hurricane 1302:
1.
Turn the Fog output to off.
2.
Wait 30–45 seconds.
3.
When there is no more fog fluid in the output line, turn off the machine by pressing the power
switch.
FCQ (Fog Cleaner Quart) was specifically developed by Chauvet to clean your Hurricane 1302.
Make sure you use FCQ regularly, no longer than 90 days between cleanings, to increase the life
of your product.
Mounting Bracket
Safety Cable
(such as
CH-05
from
Chauvet)
Mounting Clamp
(such as
CLP-15
from
Chauvet)
Bracket
Adjustment Knob
Rubber Feet for
Surface Mounting
(x4)
Summary of Contents for Hurricane 1302
Page 1: ...Quick Reference Guide ...
