Page 14 of 18
Gobo Shot™ 50W IRC User Manual Rev. 4
Wired Remote
To operate the Gobo Shot™ 50W IRC with the included wired remote, follow
the instructions below:
Plug the wired remote into the Wired Remote In port on the back of the
projector, and use the remote as follows:
•
To control the gobo’s rotation speed, turn the ROTATION SPEED knob to
the desired speed (slow to fast).
•
To control the direction of the gobo’s rotation, flip the DIRECTION switch to
either CCW (counter-clockwise) or CW (clockwise).
•
To control the power to the Gobo Shot™ 50W IRC, flip the POWER switch
to either ON or OFF.
The Wired Remote In/Out ports allow one Gobo Shot™ 50W IRC to remotely
control the actions of another Gobo Shot™ 50W IRC without the need of an
additional wired remote. Using a standard RJ45 (network) cable, connect
the projector with the wired remote from its Wired Remote Out port to the
Wired Remote In port of the other projector. Gobo Shot™ 50W IRC
projectors configured in this manner operate in unison.
When using just one wired remote to control more than one Gobo Shot™
50W IRC, be sure to use the RJ45 cables to connect the projectors. Do
not use DMX connections or the fixtures will not respond correctly.
Summary of Contents for Gobo Shot
Page 1: ...User Manual ...
