Chauvet Gobo Shot, User Manual

Page: 12 / 18

Page 12 of 18 Gobo Shot™ 50W IRC User Manual Rev. 4
Configuration
(Standalone)
Set the product in the standalone Manual mode to control without a DMX controller.
•
Connect the product to a suitable power outlet.
Never connect a product that is operating in a standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Manual Mode
To enable the Manual mode, do the following:
1. Press <MENU> repeatedly until nAn shows on the display.
2. Press <ENTER> and Gobo , GoSP , diNN , or SHut show on the display.
3. Use <UP> or <DOWN> to select the desired option as follows.
To select from the gobo rotation options:
1. Select Gobo and press <ENTER> .
2. Use <UP> or <DOWN> to select CU (gobo rotation), CCU (reverse gobo rotation),
or StoP (stop).
3. Press <ENTER> .
To select the gobo rotation speed:
1. Select GoSP and press <ENTER> .
2. Use <UP> or <DOWN> to select 000 — 255 .
3. Press <ENTER> .
For dimmer control:
1. Select diNN and press <ENTER> .
2. Use <UP> or <DOWN> to select L000 — L255 (0—100%).
3. Press <ENTER> .
To set the shutter speed:
1. Select SHut and press <ENTER> .
2. Use <UP> or <DOWN> to select S000 — S100 (0—20 Hz).
3. Press <ENTER> .
Display
You are able to flip the display for easy readability in any mounting situation.
To select your display angle:
1. Press <MENU> repeatedly until diS (normal display) or rdiS (inverted display)
shows on the display.
2. Use <UP> or <DOWN> to select the desired display.
3. Press <ENTER> .
Reset Software
To reset the software in the Gobo Shot™ 50W IRC, do the following:
1. Press <MENU> repeatedly until rESt shows on the display.
2. Press <ENTER> .
Load Factory
Defaults
To load the factory default settings in the Gobo Shot™ 50W IRC, do the following:
1. Press <MENU> repeatedly until LoAd shows on the display.
2. Press <ENTER> .