Page 25 of 31
Operation
ÉPIX Flex Drive User Manual Rev. 1
Configuration (Standalone)
Use standalone configuration to operate the product without a DMX controller.
Standalone Menu
To access the Standalone Mode menu, follow the instructions below.
1. Press
<MENU>
repeatedly until
6.Standalone Mode
is selected.
2. Press
<ENTER>
.
Custom Color
To mix a custom static color on the ÉPIX Flex Drive, do the following:
1. Navigate to the
.
2. Use
<UP>
or
<DOWN>
to select
1.User Color
.
3. Press
<ENTER>
.
4. Use
<UP>
or
<DOWN>
to select which color to edit, from
1.Red:
,
2.Green:
, or
3.Blue:
.
5. Press
<ENTER>
.
6. Use
<UP>
or
<DOWN>
to increase or decrease the selected color value, from
000–255
.
7. Press
<ENTER>
.
8. Repeat steps 4-7 until the connected products output as desired.
Preset Color
To select a preset static color on the ÉPIX Flex Drive, follow the instructions below.
1. Navigate to the
.
2. Use
<UP>
or
<DOWN>
to select
2.Preset Color
.
3. Press
<ENTER>
.
4. Use
<UP>
or
<DOWN>
to select a color, from
1.Red
,
2.Green
,
3.Blue
,
4.Cyan
,
5.Magenta
,
6.Yellow
, or
7.White
.
5. Press
<ENTER>
.
13
Background Program
000
No function
001
020 Automatic program 0
021
040 Automatic program 1
041
060 Automatic program 2
061
065 Automatic program 3
066
255 Reserved for future use
14
Background Speed
000
255 Background program speed, slow to fast
15
Background Offset
000
255 Background program offset delay, short to long
16
No Function
000
255 No function
17
Test Mode
000
020 No function
021
030 Test 1 (white)
031
040 Test 2 (color fade)
041
050 Test 3 (color scroll)
051
060 Test 4 (red)
061
070 Test 5 (green)
071
080 Test 6 (blue)
081
255 Reserved for future use
•
34 Channel mode is identical to 17 Channel mode.
•
In 17 Channel mode, Output 2 is addressed the same as Output 1.
•
In 34 Channel mode, Output 2 can be addressed separately from Output 1.
•
The automatic programs available by DMX are scaled according to the number value set
in the
settings for each port.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX signals
that could interfere with the DMX signals from the controller.
Channel Function
Value
Percent/Setting
Summary of Contents for EPIX Flex Drive
Page 1: ...User Manual ...
