Rev. 10 ML
14
Eclipse™ RGB User Manual
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
Never connect a product that is operating in any standalone mode (either Static,
Automatic, or Sound) to a DMX string connected to a DMX controller. Products
in standalone mode may transmit DMX signals that could interfere with the DMX
signals from the controller.
Automatic
Mode
To enable the Automatic modes, do the following:
1. Press
<MENU>
repeatedly until
AuF, AuS, Sou,
or
rdn
shows on the display.
2. Press
<UP>
or
<DOWN>
to choose
AuF
(for a fast show),
AuS
(for a slow show)
or
rdn
(for a random show).
3. Press
<ENTER>
.
Sound-Active
Mode
To enable the Sound-Active mode, do the following:
1. Press
<MENU>
repeatedly until
AuF, AuS, Sou,
or
rdn
shows on the display.
2. Press
<UP>
or
<DOWN>
to choose
Sou
.
3. Press
<ENTER>
.
4. Turn the music on and adjust the microphone sensitivity until the product starts
responding to the beat of the music.
1. To adjust the sound sensitivity of the Sound Active mode, do the following:
1. Press
<MENU>
repeatedly until
S 0
shows on the display.
2. Press
<UP>
or
<DOWN>
to choose between no sound activation and high sound
activation (
S 0-S 9
).
3. Press
<ENTER>
.
LED Color
Mixing
You are able to manually mix the colors and strobe rate of the LED portion of the
product. To do so, follow the steps below:
1. Press
<MENU>
repeatedly until
LEd, rGb,
or
FdE
shows on the display.
2. Press
<UP>
or
<DOWN>
to choose
rGb
.
3. Press
<ENTER>
.
4. Press
<UP>
or
<DOWN>
to adjust between full off and on for red (
r 0-r 9)
.
5. Press
<ENTER>
.
6. Press
<UP>
or
<DOWN>
to adjust between full off and on for green (
G 0-G 9)
.
7. Press
<ENTER>
.
8. Press
<UP>
or
<DOWN>
to adjust between full off and on for blue (
b 0-b 9)
.
9. Press
<ENTER>
.
10. Press
<UP>
or
<DOWN>
to adjust the strobe rate (
Sr0-Sr9)
.
11. Press
<ENTER>
.
LED Color
Fading
You are able to manually adjust the fade speed of the LED portion of the product. To
do so, follow the steps below:
1. Press
<MENU>
repeatedly until
LEd, rGb,
or
FdE
shows on the display.
2. Press
<UP>
or
<DOWN>
to choose
FdE
.
3. Press
<ENTER>
.
4. Press
<UP>
or
<DOWN>
to adjust the fade speed between slow and fast
(
SP0-SP9
).
5. Press
<ENTER>
.