Appendix
DMX-7 User Manual
7
2006-03-20/15:55
O
PERATING
I
NSTRUCTIONS
Setup
S ET T I N G U P T H E SY ST EM
1.
Place the DMX-7 on a leveled surface. Note! The DMX-7can also be rack mounted.
2.
Plug the AC to DC power supply to the system back panel and to the mains outlet.
3.
Plug in your DMX cable(s) to your intelligent lighting as described in the fixtures respective
manual. For a quick Primer on DMX see the
“
DMX Prime
r
”
section in the Appendix of this
manual.
4.
Plug in a compatible Chauvet Fogger to the AC Fog Machine Remote Controller connector.
5.
Plug in any Chauvet MONO strobes in a daisy like fashion using a
¼
”
mono phono
cable.
F I XT U R E P AT C H
The DMX-7 is programmed to control 12 channels of DMX per fixture, therefore the fixtures you wish
to control with the corresponding
“
SCANNER
”
buttons on the unit, must be spaced 12 channels apart.
F
IXTURE OR
S
CANNER
#
D
EFAULT
DMX
S
TARTING
A
DDRESS
D
IPSWITCH
S
ETTINGS
S
WITCH TO THE
“
O
N POSITION
”
1
1
1
2
13
1,3,4
3
25
1,4,5
4
37
1,3,6
5
49
1,5,6
6
51
1,2,5,6
7
63
1,2,3,4,5,6
8
75
1,2,4,7
Please refer to your individual fixture
’
s manual for DMX addressing instructions. The table above
refers to a standard 9 dipswitch binary configurable device.
