Appendix
DMX-7 User Manual
11
2006-03-20/15:55
D E L ET E A C H AS E
Action
1)
Press the Program button for 2 to 3
seconds to enter the program editor.
(You will notice that the Chase LCD display
will begin to blink with a number 1)
2)
Navigate Chases by using the adjacent
Up/Down arrow buttons to the right of the
LCD displays. Locate the chase to delete.
3)
Press the Override button and a dot will
appear on the lower right of the number in
the Chase LCD display.
4)
Press the Manual Auto/Audio button to
delete the chase. All LEDs will blink twice to
confirm.
5)
Press the Blackout button to exit the
program editor.
Notes
Playback
R U N N I N G I N AU T O - M O D E
Action
1)
Press the Manual Auto/Audio button. The
LED indicator will light up.
2)
The Scanner buttons now act as chase
memory. Press a Scanner button to trigger
a Chase.
3)
Move the first fader to adjust the speed of
the chase.
4)
Move the second fader to adjust the cross-
fade of the chase.
5)
The default run mode is sequential;
meaning the chases will run in the
sequence or order that they were selected.
Notes
If the LED blinks you are in Audio mode instead.
Press the Manual Auto/Audio button repeatedly until
the LED is permanently on.
Multiple chases selected will loop and run in the same
sequence/order they were originally selected The
active chase will blink while the pending chases
’
LEDs will remain lit.
Single/Mix Chase (Function)
You may also run more than one chase simultaneously. This mode is called the
Mix Chase mode.
6)
Press Single/Mix Chase button until the Steps LCD displays a [ PO ], also
the Chase LCD will display a [ C ].
R U N N I N G I N SO U N D - M O D E
Operating in sound-mode is the same as in auto-mode with a few exceptions listed below. Follow the
same instructions change accordingly.
Action
Press the Manual Auto/Audio button until the
LED blinks.
Fader 1 is disabled but fader 2 (cross-fade)
remains active.
Notes
In the Sound mode, programs will be triggered by the
sound using its built-in microphone.
