manualshive.com logo in svg

Chauvet DMX-40B, User Manual

Share
Download
Chauvet DMX-40B User Manual Download Page 16

Playback (Chases) 

M A N U A L   R U N   C H A S E S  

This function allows the user to manually step through each individual step in a chase. 

Action

™

1) 

Press and hold 

PROGRAM 

button for 3 

seconds to enter programming mode.  

2) 

Start a chase by pressing any one of the 

CHASE

 buttons. 

3) Press 

the 

TAPSYNC/DISPLAY

 button to 

manually step through the chase. 

4) Use 

the 

BANK

 buttons to scroll through the 

chases.

5) 

Press and hold the 

PROGRAM

 button for 3 

seconds to exit programming mode. 

Notes

‡

A U T O   R U N   C H A S E S  

Action

™

1) 

Press any one of the 

CHASE

 buttons. 

2) 

Press and release the 

Auto / Del 

button.

The corresponding LED will blink. 

3) Adjust 

the 

SPEED

and

 FADE

 faders to your 

liking.

4) 

You can override the speed and fade time 
by tapping the 

TAPSYNC/DISPLAY

 button 

(three) times. The chase will now run on the 
interval time of the taps. 

Notes

‡

CAUTION!

 The fade setting should never be slower 

than the speed setting or the scene will never 
complete execution. 

M U S I C   R U N   C H A S E S  

Action

™

1) 

Press any one of the 

CHASE

 buttons. 

2) 

Press and release the 

MUSIC/BANK COPY 

buttons. The corresponding LED will blink in 
the display. 

3) 

Your chase will now run to sound. 

Notes

‡

R U N N I N G   S E Q U E N T I A L   C H A S E S  

Action

™

1) Press 

either 

AUTO DEL

 or 

MUSIC BANK 

COPY

 buttons to select the trigger mode. 

2) 

Press the CHASE button for each chase 
you wish to playback. 

3) 

Adjust the Chase speed by changing the 

SPEED

 fader. 

Notes

‡

Chases must already be programmed. 

The chases will run in the order they are pressed 

DMX-40B User Manual 

16

Revised: 2006-12-06 09:36:47 

Summary of Contents for DMX-40B























Reviews:

No comments

Brands by name

Popular brands

Load more brands