A D D I N G A S T E P T O A C H A S E
Action
1)
Press and hold the
PROGRAM
button for 3
seconds to enter programming mode.
2)
Press the desired
CHASE
(1~6) button.
3) Press
the
TAPSYNC/Display
and the
display will display the scene and bank
number. This displays the scene you will be
adding (
STEP
LED must be on),
4) Use
the
BANK UP/DOWN
buttons to scroll
through the chase and arrive at the step
number for which you would like to add or
append a scene/step to.
5) Press
MIDI/ADD
button and one step
number will be added to the previously
displayed step number.
6) Press
the
SCENE
button that corresponds
to the scene to be copied.
7) Press
MIDI/ADD
button again to add the
new step.
8)
Press and hold the
PROGRAM
button for 3
seconds to exit programming mode.
Notes
D E L E T E A S C E N E / S T E P I N A C H A S E
Action
1)
Press and hold the
PROGRAM
button for 3
seconds to enter programming mode.
2)
Press the desired
CHASE
(1~6) button that
contains the scene to be deleted.
3) Press
the
TAPSYNC/DISPLAY
button to
switch the LED display to steps.
4)
Select the scene/step to be deleted using
the
BANK UP/DOWN
buttons.
5) Press
AUTO/DEL
button to delete the
step/scene.
6)
Press and hold
PROGRAM
button for 3
seconds to exit.
Notes
Remember that we use scene and steps
interchangeably.
D E L E T E A C H A S E
Action
1)
Press and hold the
PROGRAM
button for 3
seconds to enter programming mode.
2) Press
the
CHASE
button (1~6) to be
deleted.
3)
Press and hold the
AUTO DEL
button and
the respective
CHASE
button then release
to delete the chase. All LED’s will blink 3
times.
Notes
Scenes will remain programmed on the controller.
Only the chase is affected.
DMX-40B User Manual
14
Revised: 2006-12-06 09:36:47
