LED-BANK4 User Manual
6
2006-04-18/16:44
Striplight attachment
S
ETUP
Power
The LED-BANK4
™
can operate in voltages between 100V~240V 50Hz or 60Hz. It is equipped with
an auto sensing transformer.
To determine the power requirements for a particular fixture, see the label affixed to the back plate
of the fixture or refer to the fixture
’
s specifications chart.
A fixture
’
s listed current rating is its average current draw under normal conditions.
All fixtures must be powered directly off a switched circuit and cannot be run off a rheostat
(variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used solely for a 0%
to 100% switch.
Before applying power to a fixture, check that the source voltage matches the fixture
’
s
requirement.
All fixtures must be connected to circuits with a suitable Earth Ground.
Po w e r C a b l e C o n f i g u r a t i o n
C
ABLE
(EU)
C
ABLE
(US)
P
IN
I
NTERNATIONAL
B
ROWN
Black
Live
L
B
LUE
White
Neutral
N
Y
ELLOW
/G
REEN
Green
Earth
EG (Ground)
Mounting
R i g g i n g
The fixture includes 2 hanging
brackets and one striplight
attachment accessory.
1. Use hanging brackets to affix a standard C clamp
or mount directly to a flat surface.
2. Connect the fixtures for as strip
lights using the strip light
attachment provided.
Shown with striplight attachment