Chauvet COLORado Batten Q15, User Manual, Page: 17 / 33

Page 13 of 29
COLORado Batten Q15 User Manual Rev. 1
Operation
Configuration (DMX)
Use control configurations to operate the product with a DMX controller.
Control Personalities
To set the control personality:
1. Go to the Personality main level.
2. Select the desired personality (see table below)
Starting Address
Each product will respond to a unique starting address from the controller. All products with the same
starting address will respond in unison. To set the starting address:
1. Go to the Start Address main level.
2. Select the starting address ( 1 – 509 ).
The highest recommended starting address for each DMX mode is as follows:
Personality Channels Cells
1 Simple 4
1
1 Basic 8
1 Advanced 10
1 HSIC 6
15 Pixel 45
15
15 Simple 60
15 Basic 64
15 Advanced 66
15 HSIC 76
• See the Starting Address section for the highest starting address you can select for each
personality.
• Make sure that the starting addresses on the various products do not overlap due to the new
personality setting.
Personality Address
1 Simple 509
1 Basic 505
1 Advanced 503
1 HSIC 507
15 Pixel 465
15 Simple 453
15 Basic 449
15 Advanced 447
15 HSIC 437