Chauvet COLORado Batten Q15, User Manual, Page: 16 / 33

Page 12 of 29
Operation
COLORado Batten Q15 User Manual Rev. 1
Output
Setting
Power Mode
Avoids going over the
maximum temperature by
adjusting output intensity
Steady Mode
Uses lower output intensity at
a constant rate to avoid going
over the maximum
temperature
Static Colors
Preset Colors Color 1–14
0–100%
Preset static colors
CCT Temper White 1–14 Preset color temperatures
RGBW
Red
0–255
Combine red, green, blue,
and white to make a custom
color
Green
Blue
White
Auto
Programs
Run
AUTO.1–10
SPEED
0–100%
Selects automatic programs
and program speed
Program 1–10
Edit
Program
1–10
Scene-01–30
Red 0–255
Selects and edits a custom
program
Green 0–255
Blue 0–255
White 0–255
Master/Slave
Master DMX mode (Master)
Slave Slave mode
Dimmer
Mode
OFF Linear dimmer
DIM1–4
Dimming curves DIM1 (fast)
to DIM4 (slow)
LED
Frequency
1200Hz
Sets the PWM frequency
2000Hz
2400Hz
4000Hz
6000Hz
25000Hz
Cell Order
1 - 15(Left to Right)
Sets order of cells
15 - 1(Right to Left)
Settings
****
(Enter
Passcode)
DMX Error/
Loss
Hold Last
Continues last command
upon loss of DMX
Blackout
Blacks out product upon loss
of DMX
Disp TimeOut
On Display backlight always on
10s
Turns off display backlight
after 10 seconds of inactivity
20s
Turns off display backlight
after 20 seconds of inactivity
30s
Turns off display backlight
after 30 seconds of inactivity
Disp
Passcode
On Locks display (passcode is
<UP> , <DOWN> , <UP> ,
<DOWN> , <ENTER> )
Off
Information
Fixture Hours _ _ _ Hours
Shows total number of hours
the product has been
powered on
Firmware Version V_._
Shows current firmware
version
RDM
UID _ _ _ _ _ _ _ _ _ _ _ _ _ _ Shows product UID
Label Batten Q15 Shows RDM label
Factory
Reset
No
****
(Enter Passcode)
Resets the product to factory
default settings
Yes
Main Level Programming Levels Description