Setup
-6-
Colorado™ 4 IP User Manual Rev. 2
3. Setup
AC Power
Each COLORado™ 4 IP has an auto-ranging power supply that works with an input
voltage range of 100~240 VAC, 50/60 Hz. To determine the power requirements for
each COLORado™ 4 IP, refer to the label affixed to the product. You can also refer to
the
Technical Specifications
in this manual.
The listed current rating indicates the maximum current draw during normal operation.
For more information, you may download Sizing Circuit Breakers from the CHAUVET®
website:
www.chauvetpro.com
.
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The COLORado™ 4 IP comes with an IP66 power input cord terminated with a
proprietary IP66 connector and an IP66 to Edison power cord adapter. If the power cord
adapter that came with your product has no plug or you need to change the Edison plug,
use the table below to wire the new plug.
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
