Operating Instructions
COLORado™ 3 User Manual
21
1/30/2012 10:56 AM
Important Notes about Stage 1 Mode 1
R e d , G r e e n a n d B l u e S el e c t i o n
•
Channels 1, 2 and 3 control overall intensity of each respective color.
•
Channels 1, 2 and 3 can be combined to create an unlimited range of colors.
•
Channels 1, 2 and 3 have priority over Channels 4, 5, 6 and 7.
Y e l l o w, C ya n , P u r p l e a n d Wh i t e
•
These colors can not be mixed.
•
When levels are raised on more than one of these channels, the lowest channel number
will have priority.
S t r o b e
•
Strobe occurs at every channel with exception to programs on Channel 9 and 12.
•
Speed of the strobe is adjustable from 0 to 20 Hz.
M o d e S e l e c ti o n
•
Channel 9 values 5-244 provides mode selection and can only be activated while
Channels 1 through 7 are at value 0. When channel 9 is between 245 and 255, channels
1 through 7 can be any value.
•
When Color-Cycle mode 4 is selected channel 11 controls the speed.
I D a d d r e s s s e l e ct i o n
•
Use channel 10 to select ID addressed fixtures.
•
Each independent DMX address can have up to 66 ID addressed fixtures.
•
ID address “0” allows control of all fixtures simultaneously.
M o d u l e s el e c t i o n
•
Provides individual control of the three LED modules in each fixture.
•
Channel 11 has priority over channel 12.
E f f e c t m a c r o
•
These are pre-programmed color patterns and module chases.
•
Channel 12 has priority over channels (1, 2, 3, 4, 5, 6 & 7).
•
Channel 12 has priority over channel 11 if first activated.
