Introduction
Congratulations on the purchase of your new CHAUVET lighting effect. We are confident
you will enjoy many trouble free hours with this unit. To assist with the care and use of the
product we have prepared this short guide.
Operation
This lighting effect has been designed to function on a mains power supply of either
120V~60Hz or 230V~50Hz and has been fitted with a suitable power plug for use with
your local voltage. Check the label on the unit and the power plug for the correct voltage.
When connected to the mains power supply the unit should begin to flash. As the effect is
controlled by the rotary speed control it may be necessary to adjust to suit your mood.
The duty cycle for this effect should be no more than 15 minutes on then 15 minutes
off.
Cleaning
The most important part of your lighting effect to keep clean is the lens as this allows the
light output to transmit. This should be cleaned with a soft damp cloth. The body of the unit
may also be cleaned in the same way. We recommend internal cleaning be carried out by
a fully qualified technician.
Maintenance & Servicing
Replacement lamps are not available for this unit nor do we suggest that any work be
carried out on this unit other than by CHAUVET.
Work on internal parts should be carried out by a qualified technician. Removal of any
covers is considered a breach of warranty and will not be covered under any such
agreement unless authorized first by CHAUVET.
Troubleshooting
•
If the unit is not functional – check main power supply is ‘on’.
If after trying this solution you still have a problem contact CHAUVET.
Caution
No user serviceable parts, please refer to CHAUVET for service.
Power Connections
The unit is supplied with a power plug appropriate to its voltage and destination. Should
any other connections be required they must be carried out with the following
configuration.
Earth = Green/Yellow cable
Neutral = Blue cable
Live = Brown cable
In the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Ground
connection.
In the UK, it is required that all mains plugs are fitted with 5A fuses.
Technical Specifications
Power
120V~60Hz AC
230V~50Hz AC
Lamps
1 x 35W Xenon
1 x 35W Xenon
Dimensions
127 x 83 x 51mm / 5in x 3.25in x 2in
Weight
0.4kg / 0.88lbs
User Information
(Please complete for your records)
Date Purchased:
/
/
Serial No:
Dealer Stamp:
Model:
CH-730 MINI FLASH
At the Rear:
fi
Rotary Speed Control
Fig. 1
Mounting Bracket
Lens
