background image

 

CH-540 User Manual 

2006-05-05/00:04 

O

PERATING 

I

NSTRUCTIONS

 

The ThunderBall

 is a high output effect light

 that does not require any type of controller to operate. 

Five rotating spheres with 61 lenses each produce a spectacular mirror ball like effect that criss-cross 

continuously. This fixture is designed to operate as a stand-alone unit and to maximize exposure, 

should be placed in the center of the dance area. Once powered, the spheres will immediately rotate.  

Whether used in a mobile or permanent environment, you may find it useful to control this effect by 

means of a relay system for remote switching or to go with DMX control, use the latest in DMX 

compatible (Relay Pack), all available from CHAUVET. 

A relay system will allow you to remotely trigger the ThunderBall

 

and any other non-dimmable 

effect light from a switch panel. Make sure to use a cable of at least 25 feet to provide ample distance 

between the control panel and the switch pack for most mobile lighting applications. 

If you would prefer to control it directly from your DMX lighting console then we suggest a DMX 

compatible (relay switch-pack). These devices are an extremely affordable solution to operating non-

DMX lighting effects remotely.  

Duty Cycle (recommended) 

For optimum fixture longevity, it is recommended that this fixture cycle On and Off every 15 minutes 

due to the high temperature created while in use. For every 15 minute period that the fixture is used, 

allow 15 minutes in the Off position to cool down.  

To learn more about these and other CHAUVET products visit us at www.chauvetlighting.com. 

 

Summary of Contents for CH-540










Reviews: