CH-447 User Manual
7
Revision: 2004-11-02/12:13
O
PERATING
I
NSTRUCTIONS
The Blaze™ is a fire simulation effect that requires no additional connections or a controller to
operate. You can adjust the speed of the simulation by adjusting the speed control knob. It is
especially functional when used to project on a light colored surface, preferably pastel or white.
Whether used in a mobile or permanent environment, you may find it useful to control this effect by
means of a relay system for remote switching or to go with DMX control, use the latest in DMX
compatible (Dimmer Relay Pack), all available from CHAUVET.
A relay system will allow you to remotely trigger the Blaze™ and any other non-dimmable effect light
from a switch panel. Make sure to use a cable of at least 25 feet to provide ample distance between
the control panel and the switch pack for most mobile lighting applications.
If you would prefer to control it directly from your DMX lighting console then we suggest a DMX
compatible (relay switch-pack). These devices are an extremely affordable solution to operating non-
DMX lighting effects remotely.
To learn more about these and other CHAUVET products visit us at www.chauvetlighting.com.
