O
PERATING
I
NSTRUCTIONS
e Mode with Timer Remote:
This mode allows a single unit to run with the timer remote, and without a DMX controller.
e
tput of the blower. Use the knob on the inner control
Stand-Alon
This mo
, and without a DMX controller.
the first X represents the desired fog output,
DMX Mode
This mode allows the unit to be controlled by any universal DMX controller. If you are unfamiliar with
DMX, please read the DMX Primer on page 14.
d of the DMX link, or use a DMX splitter (Chauvet
part number DMX-2X).
1)
S
2)
S
e blower to the desired value using the dipswitches.
e
DMX Chann
F
UNCTION
4.
Operation
Stand-Alon
1)
Set the DMX address on the hazer to 000.
2)
Adjust the fan speed, haze output, and timer interval using the timer remote.
Not :
The timer remote does not control the ou
panel by the dipswitches to adjust the blower speed.
e Mode without Timer Remote:
de allows a single unit to run without the timer remote
1)
Set the DMX address of the hazer to 6XX, where
and the second X represents the desired fan speed. 0 is off, and 9 is high.
2)
Adjust the speed of the blower by turning the knob on the inner control panel by the dipswitches.
Note:
The blower has a DMX in but does not have a DMX out. In order to properly connect this
fixture to DMX, you must have it be the en
et the DMX address of the hazer to the desired value using the numeric controls on the hazer.
et the DMX address of th
Not :
The blower and the hazer fan can be set to the same DMX address to reduce the channel
count of the Arena Hazer from 3 to 2.
el Values
C
HANNEL
V
ALUE
1
000
Ù
010
Haze
No output
t (low > high)
011
Ù
255
Haze outpu
2
000
Ù
005
006
Ù
255
Fan
Fan off
Fan speed (low > high)
3
000
Ù
005
006
Ù
255
Blower
ff
)
Blower o
Blower speed (low > high
Arena Hazer User Manual
10
2007-05-29/16:06
