Page 12 of 25
Operation
Rogue Outcast 2 Hybrid User Manual Rev. 1
Configuration (DMX)
Use control configurations to operate the product with a DMX controller.
Control Personalities
To set the control personality:
1. Go to the
Run Mode
main level.
2. Select the
DMX
option.
3. Select the desired personality from
20CH
or
25CH
.
Starting Address
Each product will respond to a unique starting address from the controller. All products with the same
starting address will respond in unison. To set the starting address:
1. Go to the
Address
main level.
2. Select the starting address (
001
–
512
).
•
The highest recommended starting address for
20CH
is
493
.
•
The highest recommended starting address for
25CH
is
48
.
Sys Info
Ver
V_
Shows firmware version
Running Mode
_ _ _
Shows current running mode
DMX Address
_ _ _
Shows current DMX address
Temperature
_ _ _
Shows the product temperature in °C
Lamp On Time
_ _ _ _ _
Shows lamp on time
Remaining
Time
_ _ _ _ _
Shows lamp maintenance time
Fan1–4
_ _ _ _ _
Shows speed of fans 1–4
Power
_ _ _W
Shows power consumption in watts
Orientation
_ _ _ _
Shows current orientation
Fan5–10
_ _ _ _ _
Shows speed of fans 5–10
Base Fan1–2
_ _ _ _ _
Shows speed of base fans 1–2
BFAN1–5
_ _ _ _ _
Shows speed of BFAN 1–5
F-SP1
_ _ _ _ _
Shows F-SP1
•
See the
section for the highest starting address you can select for each
personality.
•
Make sure that the starting addresses on the various products do not overlap due to the new
personality setting.
Main Level
Programming Levels
Description
