Page 17 of 271
Operation
Maverick MK2 Wash User Manual Rev. 10
Dual control pixels
The Pixels protocol controls the individual output of the LEDs. Choose from DMX, Art-Net™, sACN, or
Kling-Net. In this mode, the three personalities available are:
Basic
(36 channels),
Standard
(48 channels), and
Advanced
(96 channels).
Dual control pixels protocol
To select the Dual Control Pixels protocol, follow the instructions below:
1. Press
<MENU>
repeatedly until the
shows on the display. Press
<ENTER>
.
2. Use
<UP>
,
<DOWN>
,
<LEFT>
, or
<RIGHT>
to select
Control Settings
, or touch the display
where it says
Control Settings
.
3. If using the buttons instead of the touchscreen, press
<ENTER>
.
4. Use
<UP>
or
<DOWN>
to select
Dual Control
, or touch the display where it says
Dual Control
.
5. If using the buttons instead of the touchscreen, press
<ENTER>
.
6. Use
<UP>
or
<DOWN>
to select
Pixels
, or touch the display where it says
Pixels
.
7. If using the buttons instead of the touchscreen, press
<ENTER>
.
8. Use
<UP>
,
<DOWN>
,
<LEFT>
, or
<RIGHT>
to select from
DMX
,
ArtNet
,
sACN
, or
Kling-Net
, or
touch the display where it says the desired protocol option.
9. If using the buttons instead of the touchscreen, press
<ENTER>
.
Dual control pixels personality
To select the Dual Control Pixels personality, set the
, then do the following:
1. Use
<UP>
or
<DOWN>
to select
Personality
, or touch the display where it says
Personality
.
2. If using the buttons instead of the touchscreen, press
<ENTER>
.
3. Use
<UP>
,
<DOWN>
,
<LEFT>
, or
<RIGHT>
to select from
Basic
(36-channel),
Standard
(48-channel), or
Advanced
(96-channel), or touch the display where it says the desired
personality.
4. If using the buttons instead of the touchscreen, press
<ENTER>
.
Dual control pixels start address
To set the starting address of the Dual Control Pixels mode, set the
, then follow the instructions
below:
1. Use
<UP>
or
<DOWN>
to select
Start Address
, or touch the display where it says
Start Address
.
2. If using the buttons instead of the touchscreen, press
<ENTER>
.
3. Enter the starting address (
1–512
) with one of the following methods:
•
Type the address number using the number pad that shows on the touchscreen display.
•
Using the buttons (or the button icons on the sides of the display):
a.
Use
<LEFT>
or
<RIGHT>
to select the digit to be altered.
b.
Use
<UP>
or
<DOWN>
to increase or decrease the number value of that digit.
c.
Repeat until the address is set as desired.
4. Press
<ENTER>
.
Dual control pixels universe
To set the Universe address of the Dual Control Pixels mode when using Art-Net™ or sACN, set the
ArtNet
or
sACN
, then do the following:
1. Use
<UP>
or
<DOWN>
to select
Universe
, or touch the display where it says
Universe
.
2. If using the buttons instead of the touchscreen, press <
ENTER>
.
3. Enter the universe address (
0–254
for Art-Net™,
0–255
for sACN) with one of the following
methods:
•
Type the address number using the number pad that shows on the touchscreen display.
•
Using the buttons (or the button icons on the sides of the display):
a.
Use
<LEFT>
or
<RIGHT>
to select the digit to be altered.
b.
Use
<UP>
or
<DOWN>
to increase or decrease the number value of that digit.
c.
Repeat until the address is set as desired.
4. Press
<ENTER>
.
ArKaos Kling-Net can only be assigned the Basic and Standard Pixels personalities.