5
EN
QUICK REFERENCE GUIDE
Color STRIKE M QRG Rev. 7
Beam Intensity
000–255
Adjusts the beam light intensity
Beam Flash
Duration
000–255
Adjusts the duration of the beam flash
Beam Flash Rate
000–255
Adjusts the beam flash rate
Tilt
000–255
Adjusts the tilt range from 0° to 180°
Tilt Offset
000–255
Adjusts the tilt offset range
Tilt Invert
No
Inverts the default tilt orientation
Yes
Pixel Invert
Plate1 Invert
No
Inverts the beam and plate pixels
individually. Reverts to default setting with
a factory reset.
Yes
Plate2 Invert
No
Yes
Tube1 Invert
No
Yes
Tube2 Invert
No
Yes
LED Array Swap
Plate Swap
No
Swaps the plate and beam pixel
mapping. Keeps the setting even after a
factory reset.
Yes
Beam Swap
No
Yes
Master/Slave
Master
DMX mode (master)
Slave
Slave mode
Dimmer Mode
OFF
Linear dimmer
DIM1–3
Dimming curves:
Dimmer 1
(fast) to
Dimmer 3
(slow)
White Balance
Off
Turns white balance off
Manual
Red
Combines red, green, and blue to create
custom color
Green
125–255
Blue
LED Frequency
600Hz
Sets the Pulse Width Modulation (PWM)
frequency
1200Hz
2000Hz
4000Hz
6000Hz
25000Hz
Fan Mode
Auto
Sets fan to auto — fan speed adjusts
according to product temperature
On
Turns fan on
Display Invert
No
Inverts the default display mode
Yes
Backlight
10s
Turns off display backlight after
10 seconds of inactivity
30s
Turns off display backlight after
30 seconds of inactivity
2Min
Turns off display backlight after
2 minutes of inactivity
Always On
Display backlight remains on
Key Lock
On
Locks the control panel
Off
Keeps the control panel unlocked
Ethernet Setting
Universe
0–255 (ArtNet)
Sets the universe
1–255 (sACN)
IP Address
2.192.0.1
Sets the IP address
Main Level
Programming Levels
Description