EN
2
COLORdash Accent 3 QRG Rev. 2
QUICK REFERENCE GUIDE
AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
AC Plug
DMX Linking
The COLORdash Accent 3 will work with a DMX controller using a 5-pin DMX serial connection. A DMX Primer is
DMX Connection
The COLORdash Accent 3 uses a 5-pin DMX data connection for its 3 control personalities:
Basic
(4Ch)
,
HSIC (7Ch)
, and
Advanced (11Ch)
. See the User Manual for information about connecting and configuring the product for DMX operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not all DMX controllers
have this capability. The COLORdash Accent 3 supports RDM protocol that allows feedback to make changes to menu
map options. Download the User Manual from
for more details.
Filters
The COLORdash Accent 3 comes with two removable filter films: 1) a frosted one that diffuses light output, and 2) a clear
one that protects both the frosted film and the lens. Both can be attached to the product through the magnetic sliding ring
on top of the lens.
Mounting
Before mounting this product, read the
. Use at least two mounting point per product. Make sure the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/
.
Mounting Diagram
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
!
Clear protective filter
Frosted diffusing filter
Magnetic sliding ring
Safety cable
Mounting clamp
Secure the safety
cable using the
passageway on
the back of the
product