COLORado™ Batten 144 Tour QRG
EN
3
Power Linking
You can link up to 3 COLORado™ Batten 144 Tour products at 120 VAC or
5 at 230 VAC. Power linking cords can be purchased separately.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Fuse
Replacement
1.
Disconnect the product.
2.
With a Phillips #2 head screwdriver, unscrew the fuse holder cap.
3.
Remove the blown fuse and replace it with a good fuse of the same type
and rating.
4.
Screw the fuse holder cap back in its place and reconnect power.
DMX Linking
The COLORado™ Batten 144 Tour will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available from
www.chauvetprofessional.com
.
DMX
Connection
The COLORado™ Batten 144 Tour uses a regular DMX data connection for its
DMX personalities:
TOUR, BLOCK1, BLOCK2, ARC1, ARC1 + D, ARC3,
ARC3 + D, ARC3 + S,
and
HSV
. See the User Manual to connect and configure
for DMX operation.
Master/Slave
Connection
The COLORado™ Batten 144 Tour uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Mounting
Before mounting this product, read the
Safety Notes
. Make sure the mounting
clamp is capable of supporting the weight of the product. For our Chauvet line of
mounting clamps, go to
trusst.com/productcategory/base-plates-accessories-
clamps/
.
Product
Mounting
Diagram
Overhead Mounting
Floor Mounting
Mounting Clamp
Safety Cable
All manuals and user guides at all-guides.com
